ACMD-6102 band 2 duplexer product brief description the avago ACMD-6102 is a highly miniaturized duplexer designed for use in band 2 (1850 C 1909 mhz ul, 1930 C 1989 mhz dl) handsets and mobile data terminals. low insertion loss in the tx channel minimizes current drain from the power amplifer, while low rx channel in - sertion loss improves receiver sensitivity. the ACMD-6102 enhances the sensitivity and dynamic range of handset receivers by providing high isolation of the transmitted signal from the receiver input and high rejection of transmit-generated noise in the receive band. the ACMD-6102 is designed with avago technologies in - novative film bulk acoustic resonator (fbar) technology, which makes possible ultra-small, high-q flters at a frac - tion of their usual size. the excellent power handling ca - pability of fbar bulk-mode resonators supports the high output power levels used in mobile communications ap - plications, while adding virtually no distortion. the ACMD-6102 also utilizes avago technologies ad - vanced microcap bonded-wafer, chip scale packaging technology. this process allows the flters to be assembled into a molded chip-on-board module with an overall size of only 1.6 x 2.0 mm and height of 0.9 mm. the acmd- 6102 is compatible with standard 1.6 x 2.0 mm duplexer pcb footprints. functional block diagram features ? miniature size - 1.6 x 2.0 mm size - 0.9 mm height - standard 1.6 x 2.0 mm pcb footprint ? high isolation ? high power rating - +33 dbm abs max tx power ? environmental - rohs compliant - halogen free - tbbpa free specifcations, C20 to +85 ? rx band performance - insertion loss: 3.0 db max - rx noise blocking: 50 db min ? tx band performance - insertion loss: 2.5 db max - tx interferer blocking: 55 db min applications smartphones, tablets, data terminals, and other mobile/ portable communication devices operating in the band 2 frequency range. ant port 3 (pin 6) rx port 2 (pin 1) tx port 1 (pin 3)
for product information and a complete list of distributors, please go to our web site: www.avagotech.com avago, avago technologies, and the a logo are trademarks of avago technologies in the united states and other countries. data subject to change. copyright ? 2005-2013 avago technologies. all rights reserved. av02-4091en - may 7, 2013 figure 1. package outline drawing figure 3. product marking and pin orientation figure 2. pad detail a = avago technologies v = ACMD-6102 y = year, last digit w = work week * xxxx = lot number notes: 1. dimensions in millimeters 2. tolerance: x.xx 0.05 mm x.xxx 0.025 mm 3. dimensions nominal unless otherwise noted 4. angles 45 nominal 5. contact areas are gold plated pin 1 mark rx 2.00 0.075 0.825 0.075 tx 1.60 0.075 1.850 top view bottom view side view ant 1 . 4 5 0 gnd gnd gnd gnd gnd (gnd) 0.925 0 . 7 2 5 0.60 (6) (9) (8) (1) (2) (3) (4) (5) (7) pin connections: 1 rx 2, 4, 5, 7, 9 gnd 3 tx 6 ant 8 gnd 0.33 (3x) 0.30 (3x) 0.075 0.050 all around 0.60 (ref) 0.30 (ref) pad 2 0.08 (0.13 max) 0.33 0.30 pads 1, 3-8 center pad 9 0.15 x 45 0.33 (ref) 0.30 (ref) 0.08 (0.13 max) rx tx ant v y w pin 1 mark x x x x a package moisture sensitivity feature test method performance moisture sensitivity level msl at 260c sd22-a113d level 3 ordering information part number quantity container ACMD-6102-bl 100 tape strip or anti-static bag ACMD-6102-t1 3000 18 mm -inch eel
|